AIDimming PE706 60W Triac Dimming LED Driver - Constant Voltage, High Efficiency
Need Custom Sizes:
Need Sample:
Shipping Time:
Ship with Shelf，Not Shipped Separately
- Description
- Installation Instructions
- Specification
- Shipping info
AIDimming PE706 60W LED Triac Dimming Power Supply (Constant Voltage Output)
The PE706 Dimming LED Driver is a high-performance, high-efficiency, and highly accurate constant voltage dimming power supply developed by our company. It uses high-efficiency, stable, and low-loss switching control chips from the USA, along with high-quality components. It features low noise, energy-saving, environmentally friendly, and long-lasting characteristics.
Features:
· Protection Types: Short Circuit, Overcurrent, Overvoltage, Overtemperature
· Natural Convection Cooling
· Compatible with Leading and Trailing Edge Dimmers
· Screw-lock Terminal Connectors
· Suitable for LED Home and Commercial Lighting Applications
· Safe No-load Protection
· Economical and Convenient Installation
· Complies with International Lighting Equipment Safety Standards
· Protection Class I
· 3-Year Warranty
Wiring Setup:
· Input Wiring: Suitable for wire gauge 16AWG-6AWG (1.25mm²-12.5mm²), stripping length 9-10mm.
· Output Wiring: Suitable for wire gauge 16AWG-6AWG (1.25mm²-12.5mm²), stripping length 9-10mm.
Usage Instructions:
The input terminal has a pressure wire cover with self-locking fasteners. Use a flathead screwdriver to slowly pry it open with even pressure, exposing the input terminals. Connect the AC live wire (L) and neutral wire (N). Follow the product label to wire the output terminals, paying attention to polarity.
Precautions:
1. When using this power supply, please distinguish between the input and output terminals. Ensure correct wiring and double-check before powering on.
2. Connect the DC output load first, ensuring it's correct, before turning on the power. In constant current mode, if the power is turned on without a load, turn off the power and wait for the stored energy in the output terminals to discharge completely before connecting the LED. Otherwise, it may damage the LED.
3. This driver is only intended for use with LED luminaires. The input voltage range is AC 200-250V, within the specified output current and voltage range. The ambient temperature should be between -20°C and +45°C, and the surface must not be covered with insulating materials that block heat dissipation. If the product is used in accordance with its operating conditions, it comes with a three-year warranty.
Abnormal Phenomena and Solutions:
If the power supply does not light up after initial electrical connection, disconnect the AC input and check
1. Whether there is any loose connection on the DC output terminal.
2. Whether the positive and negative terminals of the DC output are reversed, or if the LED board is incorrectly soldered.
3. Whether the AC input terminal has any loose connection. After troubleshooting, test again.
If the LED light flickers after proper electrical connection, disconnect the AC input and check the DC output
1. Whether there is an overload or overcurrent situation.
2. Whether the power supply design parameters match the actual usage parameters.
For any further questions or issues during use, please feel free to contact us. We will actively assist you in resolving any problems.
Disclaimer:
Images and specifications are for reference only; the actual product shall prevail. Specifications may be subject to change without prior notice.
Electrical Specifications:
Ship with Shelf
